Congrevape

DOG3 (Doge v3) RDA by Congrevape

(No reviews yet) Write a Review
  • DOG3 (Doge v3) RDA by Congrevape
  • DOG3 (Doge v3) RDA by Congrevape
  • DOG3 (Doge v3) RDA by Congrevape
  • DOG3 (Doge v3) RDA by Congrevape
  • DOG3 (Doge v3) RDA by Congrevape
  • DOG3 (Doge v3) RDA by Congrevape
  • DOG3 (Doge v3) RDA by Congrevape
  • DOG3 (Doge v3) RDA by Congrevape
£34.99

Description

DOG3 (Doge v3) RDA by Congrevape. The 3rd major RDA release in the DOGE lineup benefits from a host of improvements on previous designs.

  • Compared to previous versions of the DOGE, there is significantly more build space with the DOG3. An increase of 2.5mm in the outside diameter and 2.3mm from the negative post to the build maximum.
  • The DOG3 juice well has been expanded from the V2's 4.5mm to 9mm deep. This has been achieved using very clever placement tricks of the center pin design and the robust nature of the compact PEEK insulator to free up as much usable space in the deck for the most juice volume attainable.
  • The DOG3 tip is made from a ceramic material following 6 months of research and development, so it does not get hot or melt. Removeable and wider than standard, the tip is 11mm inside diameter, 17mm outside diameter, and 10.5mm tall.
  • 3 post or 4 post design - the DOG3's center post is removable, and can be interchanged between a single hole post and a dual hole post.
  • Copper contact pin.
  • The DOG3's juice well is extremely deep. This helps to prevent overfilling the RDA, as well as holding more liquid per drip - approx one and a half glass dropper's worth of liquid per fill.
  • Increased build space has been provided by removing the internal rotating air flow controller. The increase in build space has gone up to 20mm from 17.6mm in prior models. Outside width is a 22mm.
  • The DOG3 deck has the same brown Japanese peek insulator and key design from the V2.
  • The negative post holes are 2.2mm, as well as the dual hole center post. This will easily accommodate 20g wire. The single center post is 3mm so that it may accommodate two wires being crimped down simultaneously.
  • Manufactured using 304 stainless steel, ceramic, peek and C110 copper.

The DOGE V3's increased air efficiency has been provided by removing the second set of walls that was in the V2's top cap design. The old double walled design was creating disruptive turbulence as the air passed through the intake. The result in the DOG3 is higher air speeds, with a more direct hit onto the coil. The user will feel this as increased airflow, even though the air intake slot is still the same size. The DOG3 is dual intake only.

View AllClose

0 Reviews

View AllClose